Product Description
We can produce conveyor rollers of various standards, diameters, lengths, and types
Welcome to write to us
Description | Fabrication Services flat belt idler pulley for belt conveyor |
Application | Used in electric power, metallurgy,mine,coal, cement,steel,chemical, port, hydroelectric power and grain industries |
Pipe/Tube/Shell | 1)Material:Q235 Steel 2)Diameter:219mm-3000mm 3)Length:500mm-5000mm,depends on the belt width of the conveyor |
Shaft/Axis | Material:#45 Steel |
Bearing | Big roving crack, deep groove ball with double sealing |
Welding | Pipe and bearing housing with automatic welding |
Surface | Smooth steel color surface, rubber lagging surface |
Color | Red,green,blue or as require |
Service life | More than 30,000 hours |
Standard | GB,ISO,DIN,CEMA,JIS |
Our Pulley Features:
Conveyor Pulley Test | 1. All butt welds shall be full Penetration 2. All welds to be full seal welds to prevent rust 3. Shell seam welds are submerged arc (SAW) 4. Includes stress relieving of shell prior to machining 5. Ultrasonic testing of all shafts 6. Drillings for Temperature probe / vibration analysis device 7. Remove all butts and sharp edges |
Conveyor Pulley Shaft Selection | The major cause of conveyor pulley failure is excessive shaft deflection. The Conveyor Pulleys – ZheJiang HSCD Engineering department can perform Stress Analysis and Finite Element Analysis to maximize your conveyor pulley performance. |
Conveyor Pulley Shell Material | Q345B Carbon Steel GR350 Carbon Steel ANSI 4140 Alloy Steel ASTM A514B Stainless Steel |
Bearing House | SKF/NSK/FAG/INA/HRB/LYC, as customer request. |
Conveyor Pulley Lagging | Plain rubber lagging, Herringbone and Diamond grooves are all available . Hot Vulcanised Durometer . Hardness 50-55-65 Shore A, M Grade . Oil Resistant, Heat Resistant FRAS |
Comprising | •Drive pulley, Head pulley and Tail Pulleys •Take-Up Pulleys, •Snub pulley & Bend Pulleys •Self Cleaning Spiral Wing pulley & Drum Pulleys |
Significant advantages | • The thick pulley shell absorbs more stress. • The large crown angle provides superior belt tracking capabilities. • True concentric machining provides: • maximum contact with the belt, • consistent belt content discharge, • less deflection of shaft, • less stress on the bearings |
Available Conveyor Pulley Designs |
•Liveshaft or Deadshaft types. •Flat or crowned shell. •Taconite, labyrinth or speciality seals. •Oil or grease lubricated. •Self centering or low pressure lock element designs. |
In addition to the structural drum pulley advantages, we provide additional services with every conveyor pulley order:
• Engineering capabilities.(We can engineer and custom build pulleys to your requirements utilizing software tools such as Finite Element Analysis).
• In- house manufactured hubs and shafts.
• This ensures consistency and compatibility of components of the pulley.
• Reinforced Mine Duty pulleys are available.
• In- house assembly of complete pulley unit including: bushing, shaft, bearings and gear box.
• Dynamic or Static balancing upon request.
Besides we can manufacture the conveyor drum pulley according to the buyers’ requirements
What kinds of Conveyor Pulleys we can manufacture:
·Conveyor head pulley, Conveyor drive pulley, Conveyor bend pulley, Conveyor Tail Pulley
·Conveyor tension pulley, Conveyor snub Pulley, Conveyor Wing Pulley, Conveyor take up Pulley and so on
Our workshop
Our packaging
our products
Our certificate
Company Profile
ITALY CHINAMFG OU GROUP is a CHINAMFG international companies in the world advanced level . REAL is a registered trademark of CHINAMFG OU GROUP , designed and manufactured REAL brand roller, roller , large belt conveyors in Italy, Germany, Turkey and other countries have extensive influence , by customers alike. CHINAMFG OU GROUP valued Chinese market there is huge potential, has been dedicated to the development of China ‘s roller market. In order to meet the needs of the customers , after many visits screening, HangZhou CHINAMFG Conveying Machinery Co.,Ltd, advanced production technology and years of quality customers as a platform , has won REAL directors unanimously approved, CHINAMFG OU GROUP authorized HangZhou CHINAMFG Conveying Machinery Co.,Ltd REAL brand for the Chinese region specified design and development, production and sales, service as 1 of the company, CHINAMFG OU GROUP, with its strong technical foundation, rich belt conveyor production experience and the international influence of the brand as a backup support, REALwith CHINAMFG joint venture together to open up the Chinese market a variety of mine roller, belt conveyors businesses together to provide our customers with quality services. HangZhou CHINAMFG Conveying Machinery Co.,Ltd was founded in May 2 thousand and five. It’s a private enterprise of stock-holding system .It was located in the economic and technological development zone of Xihu (West Lake) Dis. town, HangZhou city. ZheJiang province .This place is beautiful and CHINAMFG ,and the transport is very convenient.On November 18, 2013, joint venture with the ITALY CHINAMFG OU GROUP, specializes in producing REAL brand TD75, DTII, DTIIA type fixed conveyor, mobile elevating conveyors, roller and roller.The products have gained various patents . We have got the national industrial products production license issued by the state administration of quality supervision, inspection and quarantine of the People’s Republic of China , the company has been identified as CHINAMFG trademarks in dHangZhou city committee. Enhance the brand of ‘YI LUN’.Our company has the right of exportation and the products are sold to Middle East ,Africa ,Australia ,Europe ,Southeast Asia ,Russia and some other countries and regions. The company has large lathe, numerical control, double pressing machine, double welding machine, double boring lathe, milling machine, sawing machine and so on .The company produces more than 2 thousand rollers a day and over 7 hundred thousand a year .We choose and use the special tube ,cold-drawing shaft and famous bearing to make the rollers ,and the rollers were sealed by nylon .The professional inspectors used testing equipments to examine waterproof , preventing static electricity ,sideways ,moving up and down ,revolving resistance and falling of the rollers .The examine result is that the qualified rate of the rollers is over 98%. The noise of the rollers is very low and its turning is very nimble .The life of the rollers is over 30000 hours ,and the products were praised by all the customers .The products were widely used for mine ,coal mine ,port ,steel plant ,electric plant ,feed-processing plant ,cement plant and some other enterprises. This company pursues that credit is as aim and puts the quality above all else .We request to live and develop with quality and credit .Strengthen the inner management and improve the quality of the products constantly .Offer the best products for customers from the beginning to the end .At the same time ,provide quality service for the customers ,because serving the customers well is also the aim of our enterprise.
HangZhou CHINAMFG Conveying Co., Ltd | |
Name | roller,idler,pulley |
Material | Stainless Steelseamless pipe, welded pipe |
Size | Any size as your demand |
Color | Red, yellow,any color as your demand |
Standard | ISO 9001:2000 , BV Certificate |
MOQ | 10-50 pcs |
Bearing | 6204,6205,6206,6305 ect |
Shaft diameter | 20-40 mm |
Pipe diameter | 60-219 mm |
Type | DT75,DTII,DTIIA,TK,TKII |
OEM | Welcome |
Lifetime | At least 5000 hours |
Material for transport | Coal,Ore,Clinker,grain,plant,fertilizer,ect |
Paint | Common paint and baking varnish |
Producing capacity | 1500pcs per day |
Payment Term | TT, L/C |
Loading port | ZheJiang ,HangZhou |
Production Time | 7-15days after getting the deposite |
Specifications | 1.Large capacity,2.High speed.3.Easy to install,repaire and maintenance.4.High output,efficiency,low noise. |
Advantage | 1.Best price.2.Quality control whole process.3.Quick,efficient,comprehensive service. |
FAQ
1. who are we?
We are based in ZheJiang , China, start from 2005,sell to Mid East(64.00%),Eastern Asia(16.00%),South America(7.00%),Southeast Asia(7.00%),Africa(6.00%). There are total about 51-100 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Alway
s final Inspection before shipment;
3.what can you buy from us?
Belt Conveyor,Conveyor Spare Parts,Conveyor Pulley,roller brackets,belts
4. why should you buy from us not from other suppliers?
We have a professional team with rich experience in conveyor industry at CHINAMFG Our team will provide first-class service to you.
5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,FAS,FCA,Express Delivery;
Accepted Payment Currency:USD,EUR,CNY;
Accepted Payment Type: T/T,L/C,Credit Card,PayPal,Western Union,Cash;
Language Spoken:English,Chinese,Russian /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Material: | Carbon Steel |
---|---|
Surface Treatment: | Polishing |
Motor Type: | Frequency Control Motor |
Installation: | Turning |
Thickness of Rubber Surface: | 8mm 10mm 12mm 15mm 20mm |
Diameter: | 159—2000mm |
Customization: |
Available
| Customized Request |
---|
How does the diameter of a pulley affect its mechanical advantage?
The diameter of a pulley plays a significant role in determining its mechanical advantage. Mechanical advantage refers to the ratio of the output force or load to the input force or effort applied to the pulley system. Here’s how the diameter of a pulley affects its mechanical advantage:
1. Larger Diameter: When the diameter of a pulley increases, the mechanical advantage also increases. A larger diameter means that the circumference of the pulley is greater, allowing a longer length of rope or belt to be wrapped around it. As a result, a larger pulley requires less effort force to lift a given load. This is because the load is distributed over a greater length of rope or belt, reducing the force required to overcome the load.
2. Smaller Diameter: Conversely, when the diameter of a pulley decreases, the mechanical advantage decreases. A smaller diameter means that the circumference of the pulley is reduced, resulting in a shorter length of rope or belt wrapped around it. As a result, a smaller pulley requires more effort force to lift a given load. This is because the load is concentrated over a shorter length of rope or belt, requiring a greater force to overcome the load.
It’s important to note that while a larger diameter pulley offers a greater mechanical advantage in terms of reducing the effort force required, it also results in a slower speed of the load being lifted. This is because the longer length of rope or belt requires more input distance to achieve a given output distance. On the other hand, a smaller diameter pulley offers a lower mechanical advantage but allows for a faster speed of the load being lifted.
The mechanical advantage of a pulley system can be calculated using the formula:
Mechanical Advantage = Load / Effort
Where “Load” refers to the weight or force being lifted and “Effort” refers to the force applied to the pulley system. By adjusting the diameter of the pulley, the mechanical advantage can be optimized to suit the specific requirements of the application, balancing the effort force and speed of the load being lifted.
How are pulleys used in theater and stage rigging?
Pulleys play a vital role in theater and stage rigging, enabling the movement of scenery, props, and equipment with precision and control. They are essential components of the rigging systems used in theaters and stages for lifting, flying, and manipulating various elements during performances. Here’s how pulleys are commonly used in theater and stage rigging:
1. Fly Systems: Fly systems are used to raise and lower scenery, backdrops, curtains, and other elements onto and off the stage. They consist of a series of pulleys, known as blocks, mounted on battens or grids. The pulleys allow the use of counterweights or motorized systems to control the movement of the loads. By changing the configuration of the pulleys and adjusting the counterweights, stage crews can achieve smooth and precise vertical movement of the flown elements.
2. Counterweight Systems: Counterweight systems, commonly employed in fly systems, utilize pulleys to guide the lift lines and distribute the load. The pulleys help reduce friction and ensure that the counterweights move smoothly and efficiently. By adjusting the number and arrangement of pulleys, as well as the counterweight amounts, technicians can achieve the desired balance and control the speed and movement of the flown elements.
3. Line Sets: Line sets are used to suspend and control various elements such as lighting fixtures, speakers, and special effects equipment. Pulleys are incorporated into the line sets to redirect the lines and provide mechanical advantage. This allows technicians to easily raise, lower, and adjust the position of the equipment as needed. By manipulating the pulley system, stage crews can precisely position the equipment and achieve optimal lighting, sound, and visual effects during performances.
4. Automated Systems: In modern theater and stage rigging, automated systems are becoming increasingly prevalent. These systems use motorized pulleys, known as winches or hoists, to control the movement of scenery, lighting, and other elements. The motorized pulleys enable precise and programmable control, allowing for complex and dynamic stage effects. These systems often incorporate multiple pulleys and computerized controls for enhanced automation and synchronization.
5. Rope and Cable Management: Pulleys are also used in theater and stage rigging to manage ropes and cables. They are incorporated into rope locks, cable management systems, and tensioning devices to guide and redirect the lines, ensuring smooth operation and minimizing the risk of entanglement or snags.
6. Safety and Load Distribution: Pulleys in theater and stage rigging play a crucial role in ensuring safety and proper load distribution. They help distribute the load across multiple lines, reducing the strain on individual ropes or cables. Additionally, pulleys are often equipped with safety mechanisms such as locking devices or secondary braking systems to prevent accidental drops or equipment failures.
Overall, pulleys are integral to theater and stage rigging, providing the mechanical advantage, control, and safety measures necessary for the smooth and precise movement of scenery, props, and equipment. They enable the creation of visually stunning and immersive performances, enhancing the overall theatrical experience for audiences.
Can you explain the basic principles of pulley mechanics?
Pulley mechanics are based on a few fundamental principles that govern the operation of pulley systems. Here’s an explanation of the basic principles:
1. Mechanical Advantage: The primary principle of pulley mechanics is mechanical advantage. A pulley system allows for the multiplication of force applied to the rope or belt. By distributing the force over multiple segments of the rope or belt, the load becomes easier to lift or move. The mechanical advantage gained depends on the number of pulleys used in the system. The more pulleys in the system, the greater the mechanical advantage.
2. Force Transmission: When a force is applied to one end of the rope or belt, it creates tension that causes the pulley to rotate. As the pulley turns, the force is transmitted to the load attached to the other end of the rope or belt. This force transmission allows for the movement and manipulation of objects in pulley systems.
3. Directional Change: One of the key principles of pulley mechanics is directional change. A pulley system enables the operator to change the direction of the applied force. By redirecting the force along a different path, a pulley system allows for force to be exerted from a more convenient or advantageous position. This directional change is particularly useful in situations where the force needs to be applied vertically, horizontally, or at an angle.
4. Conservation of Energy: Pulley mechanics also adhere to the principle of conservation of energy. The work done on the load by the applied force is equal to the work done against the load’s weight. Through the pulley system, the input force is transformed into an output force that moves or lifts the load. The energy input and output remain the same, but the pulley system allows for the distribution and transformation of forces to achieve the desired mechanical advantage.
5. Speed and Torque Conversion: Pulleys can also be used to convert speed and torque in mechanical systems. By varying the size of the pulleys or using pulleys of different diameters, the rotational speed and torque can be adjusted according to the requirements of the system. This speed and torque conversion allows for the optimization of power transmission and the matching of different rotational speeds between input and output components.
6. Multiple Pulley Systems: Pulleys can be combined in systems to achieve increased mechanical advantage or to create complex motion patterns. In systems with multiple pulleys, such as block and tackle arrangements, the load is distributed over several segments of rope or belt, further reducing the effort required to lift heavy objects. These systems are often used in cranes, elevators, and other applications where heavy lifting is necessary.
These basic principles of pulley mechanics form the foundation for the understanding and application of pulleys in mechanical systems. By harnessing mechanical advantage, force transmission, directional change, conservation of energy, and speed/torque conversion, pulley systems provide a versatile means of lifting, moving, and manipulating loads in various applications.
editor by CX
2024-05-08